RCA DRC6389T Owner's Manual

RCA DRC6389T Owner's Manual Manual pdf 15 page image

CONNECTIONSWatching video equipment1. Connect the other equipment to the monitor using a standard AV Cable (not included).2. Turn on the monitor.3. Turn on the video equipment and follow the instructions provided with it to playback.Notes:• Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal• If you have a mono VCR, the volume level from the speakers will be low.E. Connecting Game Systems/Video Equipment (for the Monitor Only)You can connect game systems or other video equipment for playback through the monitor.C. Connecting a Stereo Receiver or Amplifier (for the Main Unit Only)The main unit can play two channels Dolby Digital.Listening on External Audio Equipment1. Connect the main unit to the left / rightAudio In jacks on the other equipmentusing a standard Audio cable (not included).2. Turn on the main unit and slide theAV IN / DVD switch to the DVD position.3. Turn on your audio equipment and follow theinstructions provided with it to select theAUDIO IN function.Notes:• Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal.• If you have a stereo VCR, make sure you set it to stereo mode.• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, theresulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.erAV-DC cableDVD playStereo Receiver /AV cable(not included)Game System /Video EquipmentWatching video equipment1. Turn on the unit and slide the AV IN / DVD switch to the AV IN position.2. Turn on the video equipment and follow the instructions provided with itto playback.D. Connecting to a video equipment (for the Main Unit only)You can connect other video equipment for playback through the unit. DVD playerVideoequipmentWhite Red Yellow AV cable(not included)To AUDIO / VIDEOIN / OUT caksGB - 13