RCA DRC6389T Owner's Manual

RCA DRC6389T Owner's Manual Manual pdf 19 page image

GB - 17Playing a Disc1. Slide the CHARGE / STANDBY / ON switch to the ON position. Slide the ON/ OFF switch on the monitor to the ON position. See CUSTOMIZING THEFUNCTION SETTINGS before proceeding to step 2.2. Pull down front panel to open the disc door.3. Hold the disc by its sides and gently push it onto the spindle, with label sidefacing toward you until you hear a “click”.4. Gently push the disc door closed. It takes a short while for your unit to loadthe disc. After loading, for most DVDs, the unit will automatically take you mainmenu or start playing. If the unit does not automatically start playing the DVD,press the PLAY button.Pausing Playback (Still Mode)Press the PAUSE button. To resume normal playback, press the PLAYbutton.Each time you press the PAUSE button, the picture advances one frame.Stopping PlaybackPress the STOP button at the location where you want to interrupt playback. To resume playback at theposition where the disc was stopped, press the PLAY button.If you press the STOP button twice, the unit’s memory will be cleared and pressing the PLAY button willreset the disc to the beginning.fast forward / fast reverse1. Press the SEARCH or SEARCH button when a disc is playing. Each time you press the SEARCHor SEARCH button, the playback speed changes in the following sequence:2. Press the PLAY button when you reach the desired point to resume normal playback.Note:• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.• The fast playback speed may differ depending on the disc.Skip (forward / reverse)• Press the PREV button to go back to current or previous chapters/tracks.• Press the NEXT button to advance chapters/tracks.• For audio CDs, use the number buttons on the remote control to jump immediatelyto the desired track number.audio SelectionOn some DVDs, the sound is recorded in two or more formats. Follow the directions below to select thepreferred language and sound system.1. While a disc is playing, press the AUDIO button to show the current audio format number.2. Press the AUDIO button repeatedly to select the desired audio format.Note:• If only one audio format is recorded on the DVD, the number does not change.• Some DVDs allow you to change audio selections using the disc menu only. If this is the case, press theMENU button and choose the appropriate language on the disc menu.• You can select different audio channels (Stereo, Left or Right) on an Audio CD by pressing the AUDIObutton repeatedly.This owner’s manual explains the basic instructionsfor operating this unit. Some DVDs are produced ina manner that allows specific or limited operationduring playback. Therefore, this unit may notrespond to all operating commands. THIS ISNOT A DEFECT. Please refer to the instructionsaccompanying the specific DVD in question formore information about the options available onthat DVD.“ ” may appear on the screen during operation.A “ ” means that the desired operation is notpermitted by the unit or disc.PLayinG a DiScBasic playback