Connections & Setup14 Chapter 1ON-OFFTVDVD VCRAUX AUDIOSATSKIPPRESETSCCSOUNDCLEARFORMAT INFOMENUGUIDEMUTEMUTE GOBACKGOBACKVOLVOL CHINPUTINPUT002255114477 88336699PLAYPLAY FORWARDFORWARDREVERSEREVERSESTOPSTOP PAUSEPAUSERECORDRECORDFREEZEilearningLIGHTCAB/ANT•CABCCCCCC MMININCOMPONENT VIDEOY Pb PrVIDEOINPUTL RAUDIOVIDEOOUTPUTS-VIDEOOUTS-VIDEOINL RAUDIOL RAUDIOCOMPOSITE INPUT COMPONENT (1080i/720p/480p/480i)/COMPOSITE INPUTSINPUT 2Y/VIDEOPBLRS-VIDEOINPUT 3Y/VIDEOPBPRLRS-VIDEOCABLE INPUTSUBWOOFERLRFIXED/VARIABLEAUDIO OUTPUTG-LINKDIGITALAUDIOOUTPUT(OPTICAL)INPUT 1VIDEOLRVIDEOLRAUDIO/VIDEOOUTPUTViewing the Picture from the Connected DeviceThe device in this connection is connected to the INPUT 1 jacks. To view this device:1. Turn on the TV and the device you want to view.2. Press the TV button on the remote control to put the remote in TV mode.3. Press the INPUT button on the remote control to scroll through the Video Input Channels untilyou see INPUT 1 in the channel banner. See picture below for location.Note: You can set up the TV to automatically tune to the correct device you want to view. Thisis called Auto Tuning. See Chapter 3 for more information on Auto Tuning.Input 1 Cable Input16:9 Normal 1080i HDListening to English in SRSMPAA - Not Rated12:39 PM12:30 AM 00:30Program Title/Acquiring ChannelInput channel appears hereINPUTbuttonTV buttonUse these buttonsto view the pictureof the device you’veconnected to the TV.Audio/Video Input and Output Connection