RCA HD50LPW167 User Manual

Also see for R52WH76: User guide Specifications

Contents

RCA HD50LPW167 User Manual Manual pdf 75 page image

Chapter 4 73Using the TV’s Menu SystemSignal SourceThe Signal Source menu allows you to choose the source from which youwould like the signal to come: Cable Input, Antenna Input, or Video Inputs. Thesame can be accomplished using the component buttons if you’ve set up AutoTuning on the remote or by pressing the INPUT button. But, if you misplace theremote, this feature gives you another way to tune to a signal source.Auto TuningThis menu lets you specify the various components you have connected to yourTV. It lets you program a component button on the remote control (VCR, AUX,DVD, SAT•CABLE, or AUDIO) so that pressing the button automatically turnson the TV and turns the TV to the correct Video Input Channel (go to Chapter 3for detailed information).Notes: The AUX button by default is set up for an RCA HDTV Tunerreceiver.If you have two RCA satellite receivers, you can control each separately.Program the second receiver with the AUX button using the 5001 code.Then use the RCA SAT2 option in the auto tuning menu to set autotuning.Special FeaturesThe special features options are mostly intended for commercial/retail use.Initial Channel You can select the tuner and channel or input that yourTV tunes to each time the TV is turned on by plugging it back in.Initial Volume This feature works only if the Initial Channel feature isset to On. Select the volume level that you want when the TV is turned on.Maximum Volume This feature is intended to stop the volume frombeing turned up too loudly. Set the volume at the loudest level you wouldwant to hear.CableCARD Tools Displays information available for digital cable TVservices when a digital cable card is inserted into the back of the TV andyou have subscribed to digital cable service. Go to page 10 for moreinformation on using your digital cable card.The CableCARD Tools information might vary according to the brand of cardyou have inserted into your TV. The graphic to the left is an example ofwhat you might see. Select an option to view more information.Some CableCARD Tools screens might have additional information displayedon more than one page. Use the arrow buttons on the remote to highlightthe blue Continue link at the bottom of the page, for example, as thegraphic to the left shows, and simply press the OK button on the remoteto read more text. If more than one link appears, use the arrow buttons tohighlight the one you want. To exit the screen, press CLEAR on the remote.CableCARD Reset If you experience problems with your digital cable,try resetting your digital cable card. Press the right arrow to select Reset andthen press the OK button on the remote. If problems persist, contact yourcable company.Initial VolumeInitial ChannelGo Back210CableCARD ResetCableCARD ToolsMaximum Volume543Remote Setup6Press or to point to an option, then press OK toselect it. Press to return to the menu.27-+ 9-+Off: Initial Channel is disabledOn: Go to last input or channel selectedOn: Go to Cable InputChannel Sub-channelNote: An Initial Channel setting of "On" will be enabled onlywhen the TV is plugged back in or electricity is otherwiserestored to the TV. Initial Channel is not enabled from theturning on of the TV with the remote or front buttons.Main MenuConnectionsSpecial FeaturesSelect what should occur when power is restored to the TV:This screen is provided byyour local cable TV company.ContinueInitial VolumeInitial ChannelGo Back210CableCARD ResetCableCARD ToolsMaximum Volume543Remote Setup6Press 5 or 6 to point to an option, then press OK toselect it. Press 3 to return to the menu.Main Menu4Connections4Special FeaturesNetwork SetupCableCARD™ StatusCableCARD™ PairingConditional AccessGo Back0Channel SearchSignal Strength21Auto TuningSignal Source43Special Features5You can select a source from the available signal sources.Press OK to continue.Use this screen if you have misplaced your remote controland need a way to tune to a different antenna or to go tothe video inputs. Use the arrows to highlight the rectanglethen press OK or MENU-OK to scroll to the input you want.Front InputMain Menu4ConnectionsNot ConnectedInput 2Not ConnectedChannel SearchSignal StrengthGo Back210Auto TuningSignal Source43Special Features5Front InputMain MenuConnectionsPress OK to select the channel or input that is tuned whenthe VCR key is pressed on the remote.Select which input or channel should be automatically tunedwhen a button listed below is pressed on the remote control.RCA SAT2SAT-CABLE (Satellite or Cable Box)DVDVCR2VCR AUDIO (Audio Receiver/Amp)Not ConnectedNot ConnectedTip: If you indicated inTV Guide Setup thatyou have a cable box,set the Auto Tuning forSAT•CABLE to “NotConnected”.