RCA HD52W58 User Manual

Also see for HD52W58: Technical specifications

Contents

Using the TV’s FeaturesChapter 3 41Using the PIP FeatureThe PIP feature is only available for analog (NTSC) channels; PIP won’t work when tuned to adigital (ATSC) channel. Use the channel banner to determine whether a channel is digital oranalog. A digital (ATSC) channel has a dash and second number after it (e.g., 21-2); an analogchannel doesn’t (e.g., Ch 21). While you may use PIP in different ways, this basic PIP scenarioshould get you started. When watching an analog channel, follow these steps.1. Press the PIP button on the remote control. The PIP window appears on the screen andChannel Control is automatically set to the PIP window.2. Use the channel up and down, INPUT, ANT/CAB, or number buttons, or component buttonsthat have been auto tuned, to change the PIP channel.3. To change the program in the main picture window, press CH CTRL. Then use any of theabove mentioned buttons. To go back and forth between controlling the PIP window and themain picture, press the CH CTRL button.PIP Problems?• If you are channel surfing in the main window and PIP disappears, you may have tuned to adigital channel. To view PIP and the main picture, make sure that both the main and PIPchannels are analog inputs, or signals. Continue changing the channel until you find an analog(NTSC format) channel. The PIP window will reappear.The message “PIP Not Viewable” in the channel banner lets you know that PIP is notavailable on this channel and you should tune to another channel.PIP Not Viewable Cable InputCh 8-1WLPJ Antenna Input4:3 Normal 480i SDListening to English in SRSMPAA - Not Rated12:39 PM12:30 AM00:30Program Title/Acquiring Channel• If you press PIP and the PIP window is gray, you may have activated the Parental Controlfeature and the program exceeds the rating limits you set. For information on removing limits,see the section “Parental Controls.”• Closed captioning is not available in the PIP window.• PIP channel skips all digital (ATSC) TV channels and tunes to analog channels.• PIP can only be displayed in analog signals from CABLE, ANTENNA, composite, S-VIDEO andcomponent (Y, Pb, Pr) inputs in 480i format.PIP Ch 8 Unrated Cable InputCh 8-1 WLPJ Antenna Input4:3 Normal 480i SDListening to English in SRSMPAA - Not Rated12:39 PM12:30 AM00:30Program Title/Acquiring ChannelPIP channel numberMain picturechannelnumberChannelcontrolindicator