RCA HDLP50 User Manual
                                                                                | |
Contents
| 
Connections & SetupChapter 1 19TipTo access the initial setup menus at a later time, pressMENU, choose Setup Options, then Assisted Setup.Plug in the TVPlug the fl at end of the cable into the power jack on the back of the TV. Then plug the other end of the powercord into an appropriate wall outlet. Be sure to insert the plug completely. Do not plug the TV into an outletcontrolled by a light switch.Note: When you first plug your TV into an outlet, the Power indicator on the front panel will light andblink for approximately 30 seconds and then go off during the initialization of the TV. This happens onlywhen the TV is unplugged and plugged back in. The TV can only be turned on after the Power indicatorgoes off.Put Batteries in the Remote• Remove the battery compartment cover from the back of the remote bypushing down on the tab and lifting cover.• Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are alignedcorrectly with the polarities inside the remote.• Replace the cover.Turn on the TVPress TV on the remote, or press the Power button on the TV’s front panel.Note: Pressing the TV button turns on the TV and puts the remote into TVmode so that the remote operates the TV’s functions.Use the Remote Control to Completethe Assisted SetupThe technical term is “Navigation” – how you move through the on-screen menus.The method is the same throughout the menu screens: highlight your choice andselect it.To use the TV’s menus, first press the TV button on the remote control to putthe remote in TV mode. When the Assisted Setup screen appears, use the arrowbuttons to highlight one of the items listed in the menu. Use the up or downarrow button to move up or down. Use the right or left arrow button to moveright or left.To select the item that you’ve highlighted, press OK.Note: Highlighted means that the menu item stands out fromother menu items on the list (appears darker, brighter, or adifferent color).Complete the Assisted SetupYour TV’s menu system allows you to customize your TV’s features. On-screeninformation helps you choose settings to match your setup. The first time youturn on your TV, the Assisted Setup screen appears automatically. Press OK tobegin the setup.MENU CLEARTVUse these buttons during the Assisted Setup |
Related manuals for RCA HDLP50
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine