RCA HDLP50 User Manual

Contents

RCA HDLP50 User Manual Manual pdf 27 page image

Connections & SetupChapter 1 25Front PanelIf you cannot locate your remote, you can use the front panel of your TV to operate many of the TV’s features.MENU/OK Brings up the Main menu. When the menu system is displayed, pressing MENU/OK selects highlighteditems.CH6 Scans down through the channel list. In the menu system, it moves the highlight down and adjusts menu controls.CH5 Scans up through the channel list. In the menu system, it moves the highlight up and adjusts menu controls.VOL3 Decreases the volume. In the menu system, it moves the highlight left to items and adjusts menu controls.VOL4 Increases the volume. In the menu system, it moves the highlight right to items and adjusts menu controls.(Power button and indicator) Turns the TV on and off. The indicator lights when TV is on. Your HDTV’s lamp has acool-down period when the TV is turned off, and a warm up period when the TV is turned on. If you try to turn the TV onduring a cool-down, you will hear audio and then the picture will be displayed after a few moments. This could take up to oneminute. For different light status of the indicator, see above.(Available on some models) Press this icon (or the power button) to illuminate the buttons on the front panel. Thechannel banner will appear on screen. The illuminated buttons are touch sensors, press them to control your TV.MENU CHCHVOL — VOL + POWERHEADPHONEL/MONO R INAUDIO IN VIDEOCH CH VOLMENU/OK VOLS-VIDEOPower Indicator Light StatusOn TV is onOff TV is off (standby mode)Blinks Light blinks 5 times, pauses, and blinks again 5 times:Lamp is trying to turn on. If the TV doesn’t turn onafter 5 minutes and then the light blinks steadily forone minute, one of the following options is possible:Lamp door may be open. Face the back of the TV.Locate the door at the bottom of the TV and close it.Turn off the TV and turn back on. The lamp shouldturn on.Lamp may be dead. You can replace the lampyourself. Go to page 67 for lamp replacementinformation.Power buttonand indicatorNotes: The front panel illustration shows a typical front panel layout. The exact look maybe different from your TV.If you use the Front Button Block feature, the front panel no longer provides access to themenus. The Front Button Block feature disables all front panel buttons but not the jacks.For more information, see Chapter 3.The Front of Your TVFront/Side Input JacksThe TV has front/side input jacks for convenience in connecting a camcorder, digital camera, or video game system.Look for a hinged door and press to open the cover. Some models have touch sensor buttons. Please note theillustration below is just an example of how these jacks might appear.Notes: When you plug in headphones, the TV’s internal speakers are muted. Use the VOL up or down button tocontrol the volume.When connecting a device that uses a monaural cable, such as some camcorders, use the L/MONO input jack to getsound from both speakers.