RCA HDLP50 User Manual

Contents

RCA HDLP50 User Manual Manual pdf 47 page image

Using the TV’s FeaturesChapter 3 45Channel Lists (Cable Channel List,Antenna Ch. List, Video Input List)The channel lists contain the following information: major channel number,with sub-channel number only if it’s a digital channel; channel call letters, ifavailable when channel is tuned; indicated as an analog or digital channel (ifavailable), Signal Strength (if available), Favorite Ch. List; and Children’s Ch. List.The channels listed in Cable Channel List and Antenna Ch. List for off-air or cablesources are based on the Channel Search results. If a channel is not found byChannel Search, then it is not listed.Editing Channels in the Channel ListsChannels can be edited through the Favorite Ch. List and Children’s Ch. List inthe Cable and Antenna Channel List menus. Use the Favorite Ch. List to removea channel if you no longer want it in your channel list because you don’t like aprogram, for example. Remove or “hide” a channel by removing the check mark inthe box. In the example to the left, channel 4 is removed from the Cable ChannelList. If you decide later you want to view channel 4, access it using the number 4button on the remote.Use the Children’s Ch. List to block a channel in your channel list if you don’t wantchildren to view the channel. Remove or “hide” a channel by removing the checkmark in the box. In the example to the left, channel 8-2 is removed from theChildren’s Ch. List. When the TV is locked, access the channel directly by usingthe number buttons on the remote control then enter your valid password to viewthe channel.To save time, you can also add ALL or delete ALL channels in a list by changingthe box or choice field in the line that says All Video Inputs or All Channels but bevery careful because you could erase all of your selections.Note: If a cable box is connected to the CABLE INPUT, the channel list canbe edited for Cable Channel in the Cable Channel List menu. If a cable boxis connected via INPUT1, the channel list cannot be edited.Auto Tuning FeatureThe way you set up the Auto Tuning feature in the TV’s menu corresponds to thedevice buttons on the remote and the way you have each device connected to yourTV. When you set auto tuning, you’re telling the TV what channel or input totune to when you press the device buttons on the remote control. This is especiallyuseful for going directly to an input like HDMI.1. Press MENU (the Main Menu appears).2. Highlight Channel Setup and press OK. Then highlight Advanced Settings andpress OK.3. Highlight Auto Tuning and press OK.4. Highlight the device button field and continually press OK to scroll throughthe selection of inputs.Lock TV1Cable Channel List3Go Back0Video Input List5Advanced Settings6Parental Controls7Channel Search2Antenna Ch. List4Two lines of help text will appear in this area to explain thefeature and instruct the user on how to use it.Analog/ Favorite Children’sDigital Ch. List Ch. ListMain Menu4Channel SetupAll Channels2 WXIN A3 WTHR A4 WTEU A5 WMGM A6 WJAM A8 WEMM A10 WJMM A14 WMMM A15 WGUI ALock TV1Antenna Ch. List4Go Back0Video Input List5Advanced Settings6Parental Controls7Cable Channel List3Channel Search2Two lines of help text will appear in this area to explain thefeature and instruct the user on how to use it.Analog/ Signal Favorite Children’sDigital Strength Ch. List Ch. ListMain Menu4Channel SetupAll Channels2 WXIN A N/A2-1 WTHR-HD D --4 WTEU A N/A5 WMGM A N/A6 WJAM A N/A8 WEMM A N/A10 WJMM A N/A99 WMMM-DT A N/A99-99 WMMM-DT D --Cable Channel List menu.Antenna Channel List menu.Not ConnectedInput 2HDMIStartup ChannelAuto TuningGo Back210CableCARD ToolsDiagnostic Info43CableCARD Reset5Front InputChannel Setup4Advanced SettingsPress OK to select the channel or input that is tuned whenthe VCR key is pressed on the remote.Select which input or channel should be automatically tunedwhen a button listed below is pressed on the remote control.RCA SAT2SAT-CABLE (Satellite/Cable Box)DVDVCR2VCR AUDIO (Audio Receiver/Amp)Not ConnectedNot ConnectedContinues on next page...