RCA HDLP50 User Manual

Contents

RCA HDLP50 User Manual Manual pdf 56 page image

54 Chapter 4Using the TV’s Menu SystemAdvanced AudioThe Advanced Audio menu has options that allow you to adjust audio input and output.The options are:Sound Expansion Displays a choice list of available audio modes, which control theway the sound comes through your speakers when the TV is set to using the VariableOutput. The selected setting affects all inputs and tuners.To create the settings:1. Press the MENU button (the Main Menu appears).2. Select Advanced Audio, and then Sound Expansion. The following optionsappear:Mono Plays the sound in monophonic audio only. This should only be usedwhen the stereo signal is weak. The channel banner displays the word Monowhen you have selected Mono and SRS is turned off.Stereo Splits the incoming stereo audio signal into left and right frontchannels. Most TV programs and recorded materials have stereo audio. Thechannel banner displays the word Stereo when you have selected Stereo andSRS is turned off.Sound Preset ModeGo Back43210Advanced AudioBalanceSound LogicMain Menu4Audio MenuPress 5 or 6 to point to an option, then press OK toselect it. Press 3to return to the menu.The Advanced Audio menu has screens for setting up howsound is treated and configuring audio inputs and outputs.•Sound Expansion•Dynamic Bass•Audio Lang./Mode•SAP•Startup Volume•Maximum Volume•Fixed/Variable Out•Digital Audio Out•DVI Audio InputSRS, SRS Focus, and ( ) symbol are trademarks of SRS Labs, Inc.SRS Focus Technology is incorporated under license from SRS Labs, Inc.SRS TruSurround XTTMSRS Dialog ClarityTMSound Expansion1Go Back0SAP3Startup Volume4Maximum Volume5Fixed/Variable Out6Digital Audio Out7DVI Audio Input8Audio Lang./Mode2Two lines of help text will appear in this area to explain thefeature and instruct the user on how to use it.MonoStereoMain Menu4 Audio4Advanced Audio Cable InputSelect a default for analog sources and inputs:OffSRSSelect a default for sound expansion:A change in this screen is applied to all inputs.SRSFOCUSThe following options are available only if Fixed/Variable Out is set to Variable Level, Speakers On:Off No SRS processing is applied to the audio.SRS Adds greater depth and stereo separation to stereo audio signals. Delivers a panoramic 3-D sound stage fromstereo material. Use the SRS FOCUS adjustment on the right to position the sound vertically.SRS TruSurround XT (available on some models) Creates a stunning 3D sound image from standard stereo material,with deep, rich bass enhancement and sharpened dialog audio. It processes any multichannel audio source into vitual surroundsound from just two speakers or headphones. If your model has SRS TruSurround XT and you have that option selected youcan use the SRS Dialog Clarity slider to adjust the range of dialog clarity. This change is applied to all inputs.Audio Lang./ Mode Lets you choose the default audio language/mode you want to hear for ATSC (digital TV) programs. If theAudio Lang./ Mode icon ( ) in the banner lights, it means there is more than one audio language/mode available. The systemautomatically sets the audio program to the default audio language/mode from the menu when the channel you are viewing is a digitalchannel and the specified language is available for that program.In the Audio Lang./ Mode menu, highlight the default audio mode you usually want to hear by pressing the up and down arrow but-tons on your remote control. Press OK to hear that language by default whenever available on a channel.Some programs can have audio mode available that can be heard but that cannot be set as the default. To select and hear those audiomodes, navigate to the “Change Audio” action button and select OK, or use the SOUND button on the remote.Note: You can change the Audio Lang./ Mode temporarily by pressing the SOUND button on the remote control. Changing channelsreverts the Audio Lang./ Mode back to the default Audio Lang./ Mode originally selected in the menu.TruSurround XT