RCA L26WD12 User Manual

Also see for L32WD12 - 32in Widescreen LCD: Specifications Guía del usuario Guide de l'utilisateur

RCA L26WD12 User Manual Manual pdf 18 page image

Connections and Setup18 Chapter 1The Buttons on the Remote ControlArrows Used to highlight different items in the TV menu and to adjustthe menu controls.(0-9) Number Buttons Enter channel numbers and time settings directlythrough the remote control.To enter a one-digit analog channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter a three-digit channel, pressand hold the “1” button until “1” and two dashes (– –) appear, then addthe second two digits. Example: to tune to channel 123, press and hold1 until “1– –” appears, release the 1 button and then press 2 and 3.To enter a digital channel with a sub-channel, enter the main channel,then press the right arrow to enter the sub-channel and press OK.ANTENNA Switches between Analog and Digital input channel. Whentuned to an input, press to go back to the most recently used tuner(Antenna or Digital input).CC For the Analog input, displays the CC setting and Analog CC type;for the Digital input, displays the CC setting, Digital CC type, and DigitalCC preset.CH + or CH - Scan up or down through the current channel list. Pressonce to change the channel up or down; press and hold to continuechanging channels.CLEAR Removes any menu or display from the screen and returnsyou to normal viewing.FAV (Favorite) Press to browse the channels set in your Favorite List.Go to page 31 for more information.FREEZE While watching TV, freezes the picture. Press OK again tounfreeze.GO BACK Returns you to the previous channel.INFO Brings up the channel banner; press again to clear the screen.INPUT Accesses the available video input channels (VID, SVID,CMP1, CMP2, VGA, and HDMI). Press the CH+ or CH- or ANTENNAbutton to resume TV viewing.MENU Displays the menu system. If in a sub-menu, takes you backto the previous menu.MUTE Reduces the TV’s volume to its minimum level. Press again torestore the volume.OK When in the menu system, displays sub-menus.ON•OFF Turns the TV on and off.PRESETS For the Analog input, displays Picture and Sound presetoption. For the Digital input, displays Picture and Sound preset; andDig. Ch. Aud. Lang. and CH+/CH- buttons.SKIP Press once before changing channels and the TV will wait 30seconds before returning you to the original channel. Press repeatedlyto add more time. Press CLEAR to cancel SKIP.SLEEP Sets the TV to turn off. Each time you press the right arrowbutton the clock adds 5 minutes (up to 240 minutes).SOUND For the Analog input, displays the Tone control menu. Forthe Digital input, displays Picture and Sound preset; and Dig. Ch. Aud.Lang. and CH+/CH- buttons. In VGA mode, switches to the TV's audio.VOL – or VOL + Decreases or increases the TV’s volume.ZOOM – or ZOOM + Press left or right to change the size of thepicture on-screen.1 2 34 5 67 8 9ON•OFFINPUTMUTEGO BACKOKCLEARMENUPRESETSCCINFOSLEEPSOUNDFAVSKIPANTENNACH+CH-VOL+VOL-FREEZEZOOM- ZOOM+Note: If you need to replace yourremote, call 1-800-338-0376. Ashipping and handling fee, and theappropriate sales tax, will be chargedupon ordering. Have your Visa,MasterCard, or Discover Card ready.Remote control part numberR130A1