RCA L26WD12 User Manual

Also see for L32WD12 - 32in Widescreen LCD: Specifications Guía del usuario Guide de l'utilisateur

RCA L26WD12 User Manual Manual pdf 30 page image

Using the TV's Menu System30 Chapter 3The following Picture menu options are only available for VGA input.Auto adjustment Adjusts the position of the picture automatically.Phase Adjusts the picture if there is flicker of screen letters, colormisalignment, or blurring.Clock Adjusts the clock sync of the picture.Vertical position Adjusts the picture's position upward ordownward.Horizontal position Adjusts the picture's position left or right.Setup MenuThe Setup menu lets you configure the TV to fit its surroundings andyour preferences. To access the Setup menu, press MENU on theremote, and then select Setup from the Main Menu.Channel setupSignal source If you connected a signal to the ANTENNA/CABLE ANALOG INPUT only, select Analog. If you connecteda signal to the ANTENNA/CABLE DIGITAL INPUT only, selectDigital. If you connected a signal to both inputs, select Both.Analog signal type (available for the analog tuner only) Theanalog signal type was set during the initial setup. If you changehow you receive broadcasts through the ANTENNA/CABLEANALOG INPUT, you must change the Signal type setting. ChooseCable if you are using cable or a cable box for TV signals. ChooseAntenna if you are using an off-air antenna for analog TV signals.Dig. signal type (available for the digital tuner only) The digitalsignal type was set during the initial setup. If you change how youreceive broadcasts through the ANTENNA/CABLE DIGITAL INPUT,you must change the Signal type setting. Choose Cable if you areusing cable or a cable box for TV signals. Choose Antenna if youare using an off-air antenna for digital TV signals.Auto Ch. search Searches for channels the signal is receiving.Go to page 14 for more information.Auto Ch. update Searches for any new channels that are not inyour channel list and adds them to the list.List and Labels Edit the channels in the list or choose labels foreach channel.Channel number Use the number buttons on your remote toenter the channel number.In channel list If you've entered a channel you want to add tothe channel list, highlight In channel list and press the right arrowto place a check in the check box. If you've entered a channelyou want to delete from the channel list, press the right arrowbutton to uncheck the box.Go backBlack levelColorContrastColor warmth Warm...Auto adjustment ....PhaseClockVertical positionHorizontal positionPictureSetupGo backChannel setup ...List and Labels ...Autotuning ...Closed caption ...Preferences ...Message ...List and LabelsGo backChannel number 010In channel listChannel label _ _ _ _ _ _Favorite channelList and Labels continued on next page...VGA Picture menu