RCA L26WD12 User Manual

Also see for L32WD12 - 32in Widescreen LCD: Specifications Guía del usuario Guide de l'utilisateur

RCA L26WD12 User Manual Manual pdf 41 page image

Chapter 4 41Other InformationAutotuningNote: Autotuning is not available with your remote. You must purchase a compatibleRCA universal remote to use the autotuning feature.The autotuning feature automatically tunes the TV to the correct video input channel fordifferent devices you have connected to your TV. When you set up autotuning in the menusystem you don’t have to remember to change your TV to the VID input, for example, whenyou want to watch a tape on the VCR.How to Set Up the Autotuning FeatureThe way you set up the autotuning feature in the TV’s menu corresponds to the devicebuttons on the remote and the way you have each device connected to your TV. When youset up autotuning, you’re telling the TV what channel/input to tune to when you press thecorresponding button on the remote control.SetupGo backChannel setup ...List and Labels ...Autotuning ...Closed caption ...Preferences ...Message ...AutotuningGo backSet VCR channel VID1...Set DVD channel CMP1...1. Press MENU (the MAIN MENU appears).2. Highlight Channel setup and press OK on your remote control.3. Highlight Autotuning and press OK.4. Choose which device button you would like to set:Set VCR Channel Lets you set up the channel the TV tunes towhen you press the VCR button.Set DVD Channel Lets you set up the channel the TV tunes towhen you press the DVD button.5. Press the right arrow button to select the choice that matches theway you have the device connected to this TV, and press OK.You can select from the following inputs or channels:N/A Choose this if you don’t have this particular device connectedto the TV, or if you don’t want the TV to automatically tune to thecorrect channel/input when you’re using this device.Channel 3 or 4 Device is connected to the ANTENNA/CABLEANALOG or DIGITAL INPUT jack on the back of the TV, andyou want the TV to tune to channel 3 when you press thecorresponding button on the remote. Reminder: make sure thedevice’s Channel 3/4 switch is set to channel 3.VID or SVID (Video or S-Video Input) Device is connected toa VIDEO or S-Video jack on the side of the TV and you want theTV to tune to the front VIDEO or S-VIDEO input channel whenyou press the corresponding device button.CMP1 or CMP2 (Component Video Input) Compatiblecomponent video source, such as an HDTV tuner or satellitereceiver, is connected to the three COMPONENT VIDEO INPUTjacks (Y Pb Pr) on the back of the TV and you want the TV to tuneto the component video input channel (CMP1 or CMP2) when youpress the corresponding device button.HDMI Device is connected to the HDMI/DVI jack on the backof the TV and you want the TV to tune to the HDMI input channelwhen you press the corresponding device button.