Connections & SetupDVD Player + TV + VCR1. Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jackson the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.2. Connect the video cable.• Basic video connection - Connect the video cable (yellow) to the VIDEO OUT jack onthe back of your DVD Player, and to the Video Input jack on your TV.OR• S-Video - (optional) If your 'IV has an S-Video Input jack, connect the S-Video cable to theS-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. Ifyour TV doesn't have S-Video, use the basic video connection listed above.OR• Component video (optional) - If your TV has component video (Y, PB' and PR jacks) usevideo-grade cables for the Y, PB, and PR connections. Note that it is essential to match thecolor coded connectors with a compatible TV. If your TV doesn't have component video,use the basic video Connection listed above.3. Connect a coaxial cable to the antenna output jack on the VCR and to the antenna input jackon the television.4. Connect the antenna or cable to the Antenna Input jack on the VCR.5. Plug in the AC power cord into an AC outlet.Go to page 21Chapter I 11
