RCA RC5227P User Manual

Contents

Using the DVD Player's Menu SystemSet the Distance of the Attached SpeakersUse tile l)i._tance option to set the distam:e of the attached speakers. By setting the distance, you areletting the speakers know how far the sound has to travel to reach your set listening point. Thisallows the SOLind frol/1 L'ach speaker to reach the listener at the same time.5peake_LevelUse the up/down arrow keys to se_ the listening dislanceAdjust the Distance and Level of thespeakers.1.2.3.4.From the Sound metro, highlight the _S})eakerSr,tnp option and pressOK (the Speaker &,t*tp menu is clisplayed).Highlight the Distance option and press OK. (Tbe Dista*_ce screen,.,,'illbe displayed. I._epresentatious of ,.lifl'erent types of speakers ",_.il!be displayed on the right side {_fthe screen.)ltighlight I"l'olzl, C¢,lllel; Sllhll'o(_/_,r or Snrr(mlld The highligV_tedchoice will also be highlighted in the graphic to the right of the list.The + symbol in the middle of tbe graphic represents the distancefl'om the speaker to the listening point.Note: Representatio*ts c?fdif[Z,rent O,pes c_/'speake*_ are displayedill a graphic on the t_ght side of the screen. Speakers that youhavenot hooked up will appear grayed out.)Use the right arrow button to move to the Feet box displayedunderneath the graphic. Use the up/down arrow keys to adjust thedistance for the highlighted speakers. Press OK.Use the left arrow button to return to the speaker list and select thenext type of speaker, repeating the process above.Note: If you dcm't waTtt to make any changes, press CLEAR toreturn to the main menu or GO BACK to return to the SpeakerSetup menu.Set the Level of the Attached SpeakersUse the Leveloption to set the volume of the attached speakers. You can set the volume level ofeach speaker individually.1. From the Sound menu, highlight the Speaker Setup option and press OK (the Speaker Setupmenu is displayed).2. Highlight the Level option and press OK (The Level screen will appear).Note: Representations of different {t,pes of speakers are displayed in a graphic on the rightside (>[the screen. Speakers that you havenot hooked up will appear grayed out.)3. The highlight will be on the left front speaker, and the text beneath the graphic will display"left front speaker" with the setting for that speaker displayed under the text.A test tone is emitted, heginning with the highlighted graphic. The tone rotates around thespeakers, playing through each speaker for approximately 2.5 seconds. If you highlight aspeaker or change the setting on a speaker the test tone moves to that speaker.4. Use the down arrow button to move to the Settings box. The setting is measured in decibels.Use the up/down arrows to change the level setting for the highlighted speaker. Press OK toreturn the speaker graphic.5. Use the left/right arrow buttons t,:) navigate to the next speaker. As each speaker ishighlighted, the text changes to indicate which speaker it is. Repeat steps 3 and 4 to set thelevel for each speaker you have hooked Ul).Note' {[you don't want to make a*zF changes, press CZEAR to return to the main menu orGO BACK to return to the Speaker Setup menu.80 Chapter 6