Connections & SetupTVDVDPLAYERAUDIO OUTR I_AUDIO INS-VIDEO VIDEO PN R L ANT INI- ®L.p --CABLE OROFF-AIRSIGNALDOLBY DIGITAL orDTS RECEIVERDolby Digital ® and DTSeBoth Dolby Digital and DTS are audio formats used to record 5.1-channel audio signals onto the digital track of film (whilethe film is being made). Both of these formats provide up to six separate channels: left, right, center, left rear, right rear,and common subwoofer.The disc will play 5.1-channel sound only if you've connected a DTS or Dolby Digital receiver or decoder and if theoriginal movie the disc was recorded from was encoded in the Dolby Digital or DTS format.Please Read This Before Using the DIGITAL AUDIO OUT Jack!Thisplayer's digital ouq)utjack is designed for a connection to a Dolby Digital or DT5 receiver or decode_ Thisplayer has two types of DIGITAL AUDIO OUT jacks: optical and coaxial. Use the jack (and the corresponding cable)that matches the type of DIGITAL AUDIO IN jack your receiver or decoder has.Older digital equipment may not be compatible with the Dolby Digital bitstream. Such a connection can create ahigh level of noise that may be harmful to your ears, and could damage headphones or speakers.It is important to choose the correct Digital Output setting in the DVD Player's Sound menu, especially when you usethe DIGITAL AUDIO OUT jack. For more information, see chapter 6,12 Chapter 1
