RCA Scenium HD56W151 User Manual

Also see for Scenium HD56W151: Specification sheet

Contents

RCA Scenium HD56W151 User Manual Manual pdf 28 page image

Connections & Setup26 Chapter 1TipChannel Search takes several minutes becausethe TV is searching for all possible analog anddigital channels. You may want to leave andcome back later.TipTo access the setup menus, press MENU andchoose Assisted Setup.Complete the Assisted SetupYour TV’s menu system allows you to adjust your TV’s features to beconfigured to work properly. On-screen information helps you choose settingsto match your setup. The first time you turn on your TV, the Assisted Setupscreens appear automatically. Select Begin Setup to start or select Cancel Setupto exit.Set the Menu Language1. Use arrow buttons to highlight your preferred language for themenu system.2. Press OK to select that language.3. Select Continue Setup.Complete Channel SearchEven though this initial channel search can take several minutes, it is importantto complete in order for your TV to display channels and programming.1. Highlight Full Search with arrow button and press OK to tell the TV tobegin searching for channels. A progress report appears on the screen.2. When search is complete, press OK.3. Select Continue Setup.Notes: If you skip Channel Search now, you can access it later throughthe Connections menu. See Chapter 4 for more details.If cable box is connected to ANTENNA A, Channel Search cannot work.The GUIDE Plus+™ System SetupImportant Notes: If you have a VCR and/or cable box connected to theTV, you need to connect the G-LINK cable to use the GUIDE Plus+system. If you didn’t connect the G-LINK cable, go to page 23. Disregardthe screen that tells you to refer to the Quick Setup sheet because all ofthe instructions are included in this User’s Guide.The TV must be off to download information. Leave your TV offovernight, for at least 10 hours, to receive the initial download for yourarea.The GUIDE Plus+ system is a no-fee, on-screen interactive program guide thatlists what shows are on TV in your area. In order to receive program listings,you need to complete the following steps after you’ve read through theintroductory screens.Step 1: Identifying Your TV’s Location1. If your country is highlighted, press OK on the remote control.If your country isn’t highlighted, press the up or down arrow button on theremote control to highlight your country and press OK.Cancel Setup2Closed CaptioningContinue Setup1Go Back0Main Menu PreferencesPress or to point to an option, then press OK toselect it. Press to return to the menu.Highlight with the and arrows. Select with the OK button.Note: Menu Language only affects the menus, not the GUIDE.Resalte con las flechas y . Seleccione con el botón OK.Nota: Idioma de los Menús afecta sólo los menús, no la GUÍA.Mise en surbrillance avec et . Sélection avec OK.Nota : Menu des langues pour les menus, non pour le GUIDE.FrançaisEspañolEnglishCancel Setup2Antenna InfoContinue Setup1Go Back0Main Menu ConnectionsPress OK to startt a Full Channel Search of both antennasincluding automatic detection of Cable or Air antenna.Use Full Search the first time that your TV is setup tosearch for channels on Antenna A and B. Full Search will alsoautomatically detect the proper Air or Cable setting.A Full Channel Search requires several minutes to complete.Thereafter, use Quick Search. It only searches the currently-tuned antenna, keeps the Air or Cable setting the same, andis faster. Quick Search is useful when adjusting anover-the-air antenna to receive the channels for your area.Tip: If you have Cable and Air, connect Cable to Antenna A.If you have only Air, connect it to Antenna A.Status: Antenna A (Cable), Antenna B (Air).Quick SearchFull SearchFull SearchTipIf you move to a new ZIP or postal code, or ifany of your information changes and you needto access the setup screens from the TV’s mainmenu— press MENU, choose GUIDE Plus+Menu, and choose GUIDE Plus+ Setup, thenchoose “No, repeat setup process.”