RCA Scenium HD56W151 User Manual

Also see for Scenium HD56W151: Specification sheet

Contents

RCA Scenium HD56W151 User Manual Manual pdf 67 page image

Chapter 4 65Using the TV’s Menu SystemAuto ColorAuto Color minimizes the flesh tone variations of the TV picture. A differentAuto Color setting can be stored for each input. Choose On or Off, dependingon your preference.Reset Controls9Film Mode8SVM7Convergence6Noise Reduction5Color Warmth4Auto ColorAuto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress or to point to an option, then press OK to selectit. Press to return to the menu.When Auto Color is set to On, it minimizes flesh tonevariations.A change in this screen is applied to Input 2.Auto Color OffAuto Color OnColor WarmthColor Warmth automatically adjusts the color temperature of the picture. ColorWarmth can be stored for each input. The feature lets you set one of threeautomatic color adjustments:• Cool More blue.• Normal Standard picture color.• Warm More red.Reset Controls9Film Mode8SVM7Convergence6Noise FilterNoise Reduction5Color Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress or to point to an option, then press OK to selectit. Press to return to the menu.Noise Reduction reduces the appearance of video noiseon composite video sources, giving a smoother picture.For other sources of video, the Noise Reduction is not active.The Frame Comb setting provides a constant level ofimprovement. In the Adaptive setting additional filteringis applied, increasing only as the noise content increases.A change in this screen is applied to Input 2.OffAdaptiveFrame CombReset Controls9Film Mode8SVM7ConvergenceConvergence6Noise Reduction5Color Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress OK to go to Convergence which allows you to alignyour TV's picture.The Convergence menu has screens for aligning the blue,green, and red projection lenses.- Auto Converge: Automatically aligns the projection lenses.- Blue Centering: Align the blue and green images.- Red Centering: Align the red and green images.Noise ReductionNoise Reduction displays a list that lets you set one of the three settings thatallows you to reduce picture “static” or any type of interference. A NoiseReduction setting can be stored for each input. You can set the Noise Reductionto Frame Comb, Off or Adaptive. The settings are explained in the on-screenhelp text.Reset Controls9Film Mode8SVM7Convergence6Noise Reduction5Color WarmthColor Warmth4Auto Color3Picture Presets2Picture Settings1Go Back0Main Menu Picture QualityPress or to point to an option, then press OK to selectit. Press to return to the menu.Color Warmth automatically adjusts the "temperature" ofthe picture. Cool gives a more blue pallete of picture colors.Warm gives a more red pallete of picture colors.Note: Selecting a new Picture Preset (except for Personalpresets) may also change your Color Warmth setting.A change in this screen is applied to Input 2.WarmNormalCoolWhen you select the Convergence feature, a submenu appears with three options:• Auto Converge automatically aligns the projection lenses to self-correct color images. You’llsee flashing squares of color dance across the screen (this is normal).Note: After performing auto convergence, use the Blue Centering and Red Centeringmenus to fine tune convergence in the center of the screen.• Blue Centering aligns the blue and green images to fine tune the picture.• Red Centering aligns the red and green images to fine tune the picture.Note: The ability to change channels is disabled when adjusting the convergence options.The TV must be tuned to a usable signal to converge the picture.Follow the on-screen instructions to adjust the TV appropriately.ConvergenceThe Convergence feature lets you adjust the TV’s three tubes. When the TV tubes’images are precisely aligned, they create the color images you see on the screen.Over time, the picture can drift out of alignment (this is normal). If your pictureseems fuzzy or has a yellow tint, using Convergence could correct thismisalignment.Note: Make sure the TV has been on for at least 30 minutes (TV needs towarm up for best results).