RCA Scenium HD56W151 User Manual

Also see for Scenium HD56W151: Specification sheet

Contents

RCA Scenium HD56W151 User Manual Manual pdf 38 page image

36 Chapter 2Using the Remote ControlThe Learning FeatureBefore using the learning feature, make sure this TV’s remote control is programmed to controlother components you have connected to the TV. Programming the remote control erases alllearned commands for that component mode.After you program the TV’s remote control to operate the other component, the TV’s remoteprovides most of the operations you need. However, there may be some functions on thecomponent’s original remote control that your TV’s remote control doesn’t have. For example, yourDVD remote control might have a ZOOM button that enables you to enlarge the picture, but yourTV remote doesn’t have that button. The learning feature enables you to record the functionality ofa specific button from the original remote control to one of the TV’s remote control buttons.Note: All learned functions for a mode can be erased if you program a different componentto that mode.Adding a Learned FunctionThere are several things to consider before you begin the learning process:• You can’t record a learned function to the following buttons on the TV’s remote control:component buttons (TV, VCR, DVD, SAT/CAB, AUX, and AUDIO), the CLEAR button, and theLIGHT button.• Before adding a Learned Function, you must program this TV’s remote control to operate thatcomponent because programming the remote control erases all learned commands for thatcomponent mode.• Do the learning process in low light areas because too much natural light or fluorescent lightmight cause the learning feature to fail because the remote control functions are recorded(learned) by sending infrared (IR) signals.• The TV’s remote and the original remote should be no more than 2 inches apart.• In order to record (learn) a function from one remote to the other, you must make sure theInfrared (IR) transmitter of the original remote is facing the IR receiver on the top of the TV’sremote (see illustration). To accomplish this, you may have to hold a remote in each handinstead of laying both on the table.• The learned buttons are mode specific—if you add a button function from your DVD player’sremote control, you must press the DVD button first before the learned function will work (inTV mode, the button where you’ve stored the learned function will continue to work as italways has).up toup to2inchesapartUp to 2 inches apart