EC9000i Series Scanner User Guide Setting up your scannerInkjet cartridgeTo replace the front cover:Caution: Before you replace the front cover, make sure the insertion extensions are pulled forward.Otherwise, you might damage the front cover.1. Carefully place the front cover over the scanner assembly. Make sure that the cover overlaps theassembly correctly by lining it up with the metal posts.2. Gently push the cover down until it snaps into place.Endorsement printer coverRemove the endorsement printer cover when you need to clear paper jams, to insert or replace theendorser inkjet printer cartridge, or to clean the image sensor.1. Grasp the top of the endorsement printer cover.2. Gently pull the cover upwards until it detaches from the scanner.To replace the endorsement printer cover:1. Carefully place the endorsement printer cover over the scanner assembly; make sure that thecover overlaps the assembly correctly.2. Gently push the cover down until it snaps into place.Franker and endorser inkjet cartridgesThe franker cartridge creates a red ink stamp that defaces the front of each checkwith a message that says “Electronically Presented”. All EC9000i scanners comewith a franker cartridge.Certain EC9000i scanners are capable of endorsing checks but the cartridges arenot included with scanners. With your scanning application, the endorser inkjetprinter places user-defined text on the rear of the check.Franker or inkjet cartridges can be purchased by contacting your solutionprovider or reseller.Follow the directions below to insert the cartridges into the scanner unit.Caution:• Ink might be harmful if swallowed.• Avoid contact with eyes.• Damage to the unit or the cartridge which results from modifying the inkjetcartridge is not the responsibility of RDM.• The inkjet cartridge is not refillable.• Inkjet cartridges are not licensed for modifications.• RDM may change product designs, features, or specifications at any time.Franker cartridge©2014 RDM Corporation Page 16