RDM EC9001f User Manual
Also see for EC9001f: User guide
                              | |
Contents
| 
EC9000i Series Scanner User Guide Setting up your scanner5. To insert the new inkjet cartridge, pull the inkjet latch back and place the inkjet cartridge into theholder. The cartridge needs to be at an angle so that the back of the cartridge is lower than thefront of the cartridge.6. Push the cartridge down into the holder until the cartridge snaps into place.Once installed, the inkjet cartridge sits on a slight angle with the back of the cartridge lower thanthe front.7. Make sure there is no gap between the inkjet cartridge and the endorsement channel.8. Replace the endorsement printer cover.Replacing the paper roll for the printerIf your scanner has a printer, the following stepsdescribe how to replace the paper roll.1. Press the printer cover release button andcompletely open the printer cover.2. Remove the empty paper roll from the papercompartment.3. Insert the new paper roll into the compartment,with the end of the paper roll rolling from the top.4. Pull the paper out of the compartment and closethe printer cover with the paper sticking out.Push the cover closed in the center of the printercover.Make sure the cover is completely closed. If youpush the cover from the sides, the cover mightnot close completely. When closed correctly,both sides of the printer cover are flush with the scanner.5. Rip off any access paper sticking out of the printer cover.©2014 RDM Corporation Page 18 |
Related manuals for RDM EC9001f
manualsdatabase
Your AI-powered manual search engine