POWER PORTSDC IN (POWER INPUT)The following expanders feature a DC IN connector:DSMC2 Base ExpanderDSMC2 V-Lock I/O ExpanderDSMC2 Jetpack ExpanderDSMC2 Jetpack-SDI ExpanderDSMC2 REDVOLT ExpanderThe 6-pin 1B LEMO connector accepts DC input power from 11.5 V DC to 17 V DC. A built-in power conditionerprotects against reverse- polarity connections, electrostatic discharge (ESD), undervoltage, overvoltage, andovercurrent.WARNING: Both pairs of +VBATT and GROUND pins must be wired. Using a third-party power cable that wires onlyone (1) pair of +VBATT and GROUND pins may damage the power supply or the camera. Damage to the powersupply or other components of the camera system caused by using an inappropriate power cable is not coveredunder warranty.Figure: Front Face of the DC In Power Input Connector (Looking at the Camera)6-PIN 1B DC INPUT CONNECTORPIN SIGNAL DESCRIPTION1 +VBATT Power input, +11.5 to +17 V DC2 +VBATT Power input, +11.5 to +17 V DC3 SCL-BATT Serial battery bus clock4 GROUND Power return (camera ground)5 GROUND Power return (camera ground)6 SDA-BATT Serial battery bus dataNOTE: Mating connector is FGJ.1B.306.CWLD72Z.C O PYR I G HT © 2017 R ED.C O M , I NC 955- 0127_V6.3, R EV- M | 213RED RAVEN OPERATION GUIDE
