Racelogic DriftBox Instruction Manual

Contents

Racelogic DriftBox Instruction Manual Manual pdf 14 page image

Racelogic Ltd Drift ModePage 14Drift ModeDrift Mode is used to measure your drifting ability, showing current and maximum driftangles and give a grading of your performance as a score between 0 and 10 points.Scores can be sent to the DriftBox website for publishing on the Top Scores database.On a fully activated DriftBox an SD card can be inserted to log your scores and data fromyour runs that can then be downloaded and viewed on your computer and in the DriftBoxTools PC software.The Drift Mode can be used in two different ways; Sectors and Practice. The default isPractice, but you can turn on Sectors in the Drift Menu.PracticeWithout Sectors enabled, the DriftBox measures a single run at a time, where a run isdefined as anything larger than 5o of drift and a speed greater than 25Km/h. The runfinishes when you go below these thresholds. You can then see Peak Drift angle, speed atwhich that drift angle occurred, the peak Lateral G during the run and the overall Scorewhich is based on Lateral G and Drift Angle.SectorsWhen Sector Mode is selected, a run starts at one virtual gate and finishes at another, seethe ‘Sectors’ section later on for more details.Selecting Sector ModeTo set DriftBox to Sector mode• In Drift Mode, press MENU• Select ‘Sectors’, then press the OK button.DRIFT MENUUNITS√ SECTORSSET SECTORSLOAD SECTORS