Racelogic Ltd DriftBoxTools SoftwarePage 41Selecting ChannelsAll channels logged by DriftBox appear in the data window; all except speed are initiallygreyed out, but the data can still be seen. To enable a particular channel and make itvisible in the Graph window, click in the tick box to the left of the channel name. Forexample, to display lateral acceleration:Click here toturn the channelon or offDriftBoxTools will automatically scale the channel to its minimum and maximum valuesand show it in the graph window. The enabled channel will then be highlighted in itsdisplay colour.The data table contains all of the logged channels from the DriftBox file plus Lateral andLongitudinal Acceleration and Radius of Turn channels, calculated when the file is firstloaded. Scroll up and down the channel list to find the desired channel.A channel can also be found by typing the first letter of the channel, for example ‘S’ forSatellites, providing that the data table is the currently active window. If there is more thanone channel that starts with the same letter then press the key again until the softwarestops on your desired channel.Show Selected Channels OnlyThe data table channel list can be reduced to show only the ticked channels, as in theexample above, by clicking the right mouse button when the mouse pointer is in the datatable, then selecting ‘Show Selected Channels Only’. This is very useful when you aremoving the cursor through the graph window and wish to see the displayed channels dataat the cursor point.