PROGRAMMING4-344.7.6 Change DateThe MiniRAE 2000 monitor is equipped with a real timeclock (RTC). The user can enter the correct date and time(see 4.7.7) for the real time clock.1. “Change Date?” is the sixth sub-menu item in theMonitor Setup menu.2. Press [Y/+] and the display shows the current date“mm / dd / yy” with the left most digit of the dateflashing.5. To modify this value, use the [Y/+] or [N/-] key tochange the digit value and press the [MODE] keymomentarily to advance to the next digit. The flashingdigit will move on to next digit to its right. Repeat thisprocess until the new date and time values are entered.Press and hold the [MODE] key for 1 second to exitdata entry mode.4. If there is any change to the existing value, the displayshows “Save?” Press [Y/+] to confirm the new value orpress [N/-] or [MODE] to discard the changes andmove to the next sub-menu.
