PROGRAMMING4-354.7.7 Change TimeTo change the time in the RTC of the MiniRAE 2000:1. “Change Time?” is the seventh sub-menu item in theMonitor Setup menu.2. Press [Y/+] and the display shows the current time inthe 24-hour format “hh : mm” with the left most digitof the time flashing.3. To modify this value, use the [Y/+] or [N/-] key tochange the digit value and press the [MODE] keymomentarily to advance to the next digit. The flashingdigit will move on to next digit to its right. Repeat thisprocess until the new date and time values are entered.Press and hold the [MODE] key for 1 second to exitdata entry mode.4. If there is any change to the existing value, the displayshows “Save?” Press [Y/+] to confirm the new value orpress [N/-] or [MODE] to discard the changes andmove to the next sub-menu.
