Rain Bird E-6C User Manual

Also see for E-6C: Manual for use User manual

Contents

10 Ec Controller• Od31 = Waters only on odd-numbered days of the month,but not on the 31st of any month or on February 29. (Thiswatering day cycle complies with special ordinances insome water-restricted areas).4. In the Program Start Times box for program A, write the timeyou want the program to begin watering. You may assign upto four start times to each program. If you want the programto water only once each watering day, enter only one starttime. Enter other start times only if you want to repeat theentire program more than once each watering day.5. Enter the start time(s) for program B (if any). In the example,Program A begins watering at 7 a.m. Program B beginswatering twice each watering day, once at 5 a.m. (05:00)and again at 3 p.m. (15:00)NOTE: If the total run time for one programoverlaps the start time for a second program, thecontroller will automatically stack the programsand delay the start time of the second programuntil the first program finishes watering.6. Next to each station number, enter a brief description of thearea covered by each controller station. Remember, astation is a set of sprinklers operated by one remotecontrol valve.7. In the Run Time column for each program, enter thenumber of minutes you want each station to run.Notice that stations 1 through 4 are assigned to program A,while stations 5 and 6 are assigned to program B.The Ec allows you to use the same station in multipleprograms for special watering needs. However, for mostapplications, choosing not to repeat a station makesprogramming simpler.NOTE: Any Water Budget setting applies to allprograms (A, B, and C).