18 Ec ControllerAdjust Water BudgetDIAGRAM 20 & 21Adjusting the Water Budget feature is the easiest way toincrease or decrease the run times of all stations on a program.You can use Water Budget to decrease watering during coolwinter months, or to increase watering during hot, dry periods.You can set the Water Budget percentage from 10% to 200%(all station run times doubled), in increments of 10%.Changing the Water Budget percentage affects all stationson all three programs (A, B, and C).Water Budget percentages are calculated on the normalprogrammed run time for each station. For example, if a stationis programmed to run for 10 minutes, and you set the WaterBudget to 80%, the station will only run for 8 minutes (80% of10 minutes). If you set the Water Budget to 120%, that samestation will run for 12 minutes (120% of 10 minutes).NOTE: Water Budget will not split a minute. Onewhole minute is the lowest run time allowed.1. Turn the programming dial to WATER BUDGET.2. The number 100 appears in the display. This indicatesthat all stations are running at 100% of their programmedwatering time.Auto ModeDIAGRAM 18 & 191. To return the controller to automatic operation, turn theprogramming dial to AUTO.2. When the controller is NOT watering, it displays:• Any program (A, B, C, or none) scheduled to water today• The current time• %A %B %C, if there is a water budget setting other than100%3. When the controller IS watering, it displays:• The program that is running• The station number currently running• The watering time remaining for that station• %A %B %C, if there is a water budget setting other than100%