Rangemaster KITCHENER U109720 - 01 Installation And User Manual

Also see for Kitchener 90 Electric: Installation and user guide User's guide & installation instructions

30WARNING - SERVICING TO BE CARRIED OUT ONLY BY AN AUTHORISED PERSONDisconnect from electricity before servicing. Check appliance is safe when you have finished.21. To Remove Oven Element.Disconnect from electricity supply.Remove oven inner back (see 18).Remove 2 screws from thetop of the element and 1 fromthe bottom of the elementin side the oven. Lift elementout carefully, disconnect theterminals connected to theelement noting their positions.If it is not possible to disconnectthe leads in this way, pull cookerforward to gain access to therear.Remove screws securing the electric cover to the backsheet and remove cover and disconnect the terminalsfrom the rear.Fit new element, and reassemble in reverse order. Checkoperation of oven.22. To change oven light bulb.LH OvenRemove the oven furniture and side linings. Remove theoven rear liner.RH OvenRemove the oven inner back (see 18). The oven lightcover is now accessible. Unscrew the cover.Unscrew the bulb.Fit an Edison screw fitting 15w 240v lamp, FOR OVENS. Itmust be a special bulb, heat resistant to 300°C.23 To Adjust the Oven Door AngleThe door bottom hinge can be adjusted to alter theangle of the door.Loosen the bottom hinge fixing screws and use thenotch and a flat bladed screwdriver to move the positionof the hinge to set the hinge position.Retighten the hinge screws.Effect of hinge adjustment – exaggerated for clarityCentre line of hinge pinOven door omitted for clarityt