GB-5RANSOMES SMALL PEDESTRIAN RANGESAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL2.3 HOW TO USE THE PARTS MANUALITEM NUMBEREach part which is identified in the illustrations has an item number. Parts which do not have an item number may not bereadily identified in the illustration but are usually closely associated with the immediately adjacent part.ASSEMBLIESA complete assembly, e.g. a wheel motor or hydraulic motor or roll assembly, is listed as a complete item withsubsequent individual components listed separately.The assembly is listed under it's part number with component parts being listed offset to the right, e.g.:-ITEM RANSOMES DESCRIPTION QTY REMARKSPART NO.1 LMSD798 Roll Assy. 1 ALL MACHINES2 MBB4490 • Tube 13 LMSD926 • End Cap Assy. 24 MBB6851 • • End Cap 15 H009116 • • Bearing 16 MBB2356 • Seal Housing 17 A224016 • Seal 2* A122192 Screw 2It may not be possible to illustrate every item. With certain items purchased from outside suppliers some componentparts may not be available from Ransomes and may need to be specially ordered from the supplier.QUANTITIESQuantities shown are for one assembly or sub-assembly.USING THE PARTS LISTDetermine the function and application of the part required. Turn to the main index page and select the appropriatesection. Locate the part on the illustration and parts list and read off the quantity from the appropriate MODEL column.NUMERICAL INDEXThis is a summary of all part numbers used in the manual arranged in numerical sequence and showing the page anditem number under which the parts appear.ORDERING OF SPARE PARTSWhen ordering replacement parts, it is most important to quote the SERIAL NUMBER of the machine, PART NUMBER,DESCRIPTION and QUANTITY required.Any arbitrary modifications carried out on this machine may relieve the manufacturer of liability for anyresulting damage or injury.ABBREVIATIONSN/A Not AvailableAR As Required2 INTRODUCTION