Ransomes Super Certes 51 Maintenance And Parts Manual

Also see for 51 Marquis: Safety, operation & maintenance manual Safety, operation & maintenance manual Safety, operation & maintenance manual Safety, operation & maintenance manual

GB-28RANSOMES SMALL PEDESTRIAN RANGESAFETY, OPERATORS, MAINTENANCE AND PARTS MANUAL9 ACCESSORIESTO REPLACE THE VERTI-GROOM BELT1. Disengage Verti-Groom drive clutch bypulling clutch operating knob. This leavesa gap between the drive pully and theclutch operating knob. Slide the belt intothe gap to allow the drive belt to becomeloose. Slide drive belt pulley lip onto theVerti-Groom shaft.2. Clear debrisout of pulley.3. Fit nwe Verti-Groom drive belt by putting itonto the Verti-Groom clutch handwheeland the pulley, then slide it over the Verti-Groom shaft pulley. By rotating the clutchhandwheel feed drive belt onto the pullley.4. Adjust as above.5. Before running the machine replace allcovers.9.6 VERTI-GROOM LUBRICATION.Check all nuts and bolts every 75 hours.Lubricate the following with grease to thespecification on page10 under recommendedgrease.Weekly or every 25 working hours.Drive belt housing (Fig.9.6a)Verti-Groom link (Fig.9.6b)Grooved rollNOTE: DO NOT OVER GREASE as this may allowdebris to build up close to pulleys.Fig. 9.6aFig. 9.6b