Raritan Dominion DKX116 User Manual

Also see for DOMINION DKX116: User guide User manual

Contents

Raritan Dominion DKX116 User Manual Manual pdf 18 page image

10 DOMINION KX USER M ANUALNote to CommandCenter UsersIf you are using Dominion KX in a CommandCenter configuration, perform the installation steps asoutlined above. After completing these steps, consult the CommandCenter user guide to proceed with yourinstallation. The rest of this user guide applies primarily to users deploying their Dominion KX unit(s)without the integration functionality of CommandCenter.Connect to Dominion KX RemotelyWhen you complete the physical installation of Dominion KX, establish an initial network connection,following the steps below.Note: Please see Chapter 3: Raritan Remote Client, KVM Console Control and Color Calibration formore information on optimizing Dominion KX performance for target servers.Launch Raritan Remote Client (RRC)1. Log on to any Windows-based computer with network access to Dominion KX.2. If you are using Windows NT, 2000, XP, or 2003, ensure that you are not a “restricted” user.3. Launch Microsoft Internet Explorer (ensure that your Internet Explorer security settings allow thedownload and execution of ActiveX controls).Note: A Windows default security setting of Medium is sufficient.4. In the Internet Explorer Address bar, type the IP address you assigned to Dominion KX in Step 6 of theprevious section, Initial Configuration. Press the <Enter> key to load and launch the web accessclient, Raritan Remote Client (RRC).Figure 7 RRC Connection Window5. After RRC launches, a device tree of all automatically detected Raritan devices found on your subnetis displayed on the left side of the screen. If you do not find your Dominion KX unit listed by name,create an icon manually by selecting Connection → New Profile (please see Chapter 3: RaritanRemote Client (RRC), RRC Navigator, Creating New Profiles for more information).6. Double-click on the icon that corresponds to your Dominion KX unit.