Raritan Dominion DKX116 User Manual

Also see for DOMINION DKX116: User guide User manual

Contents

Raritan Dominion DKX116 User Manual Manual pdf 24 page image

16 DOMINION KX USER M ANUALRRC NavigatorThe RRC Navigator provides a tree view of every known Raritan KVM Over IP device so you can accessall Raritan networked appliances for which a connection profile exists. All Raritan devices automaticallyidentified on the network are displayed.Note: Automatic Raritan device identification uses the UDP protocol, and will typically identify allRaritan devices on your subnet. Network administrators rarely allow UDP to function outside of a subnet.Automatic Raritan device identification will find only those Raritan devices that are configured to use thedefault TCP Port (5000).Figure 13 Expanded RRC Navigation TreeEach device entry in the RRC Navigator provides two icons to communicate network status and connectionprofile information.Left Icon (Connection Profile)Profiled – A network connection profile exists for this device.Modem Profile – A modem connection profile exists for this device.Not Profiled – RRC found this device on the network, but a connection profile does not existfor it.Right Icon (Network Status)Connected (green) – You are currently authenticated and connected to this device.Available (black) – This device is currently available on the network, but you are notcurrently connected to it.Unavailable – A profile exists for this device, but it is not currently available on thenetwork. (Note that all devices with modem profiles to which you are not currentlyconnected will display this icon.)For each Raritan device to which you are connected, RRC Navigator expands its display tree to show eachport for which you have access.• Ports displayed with a green icon indicate that you are connected to that port.• Bold type indicates which port is currently displayed (active) in the remote desktop area of the client.