44 DOMINION KX USER M ANUALForced User LogoffTo manually log off a user, select that user in the user tree. Right-click on the user icon and select LogoffUser.Figure 41 Logoff User Menu, accessed by Right-clicking on User iconReboot Dominion KXOn the Setup menu, click Reboot Device to reboot your Dominion KX unit when in Dominion KXManager.Performance SettingsUse this window to set up Dominion KX’s video data transfer and bandwidth parameters.1. On the Setup menu, click Configuration, and then click Performance. The Performance Settingwindow appears.Figure 42 Performance Settings Window2. Pause Video Stream for Idle Users: Click on the drop-down arrow to pause the flow of video dataduring periods of prolonged inactivity to prevent inactive users from needlessly consuming bandwidth.Options: Never / 5 / 15 / 30 / 60 / 120 minutes3. Total Bandwidth Usage: Click on the drop-down arrow to set a maximum amount of bandwidth thatcan be consumed by this one Dominion KX unit (global). The lower the bandwidth allowed, the slowerthe performance that may result. Options: No Limit / 10MBits / 5MBits / 2MBits / 1MBits / 512kbit /256kbit / 128kbit4. Bandwidth per User: Click on the drop-down arrow to set a maximum amount of bandwidth that canbe consumed by each user logged onto this one Dominion KX unit. Options: No Limit / 10MBits /5MBits / 2MBits / 1MBits / 512kbit / 256kbit / 128kbit5. Click [OK] to set Performance Settings, or [Cancel] to close the window.
