38 PARAGON II USER M ANUALUser Station ProfileAs administrator, select Option 4 from the Administration Menu to activate the User Station Profile to setthe global keyboard type and video delay.Keyboard TypeThe Paragon’s OSUI supports three types of keyboard mappings: Select either “English” – the default isU.S. English, “French,” or “German”. If you prefer using a non-English keyboard, temporarily attach anEnglish-language keyboard; use any of its arrow keys to move the highlight to the “Keyboard Type” field,press the [Enter] key to turn the highlight green, use any of the arrow keys to toggle the field to the correctkeyboard type, and press the [Enter] key again to select it. You can now swap in the type of keyboard youwant to use.Video DelayIf your monitor switches too much between resolutions, or takes too long to sync up when you scan orswitch channel ports on Paragon II (if it is an LCD monitor), you can set a video delay for channel portswitching at your user station.If you set the video delay to any number of seconds greater than zero, Paragon II will wait until a videosignal is constant for that number of seconds before passing it through to the monitor. To set video delay,use any of the arrow keys to move the highlight to the “Video delay--switching” field, press the [Enter]key to turn the highlight green, type in the desired two-digit delay from 00 to 30 seconds (or use the up-and down-arrow keys to increment or decrement the field by 1), and press the [Enter] key again to select it.When you finish making any changes to either of these values, press [S] to save the changes to memory, orpress [Esc] to abort them. The changes are applied only to your user station (the station at which the changewas made).Figure 40 User Station Profile Screen