PX3TS Transfer Switch Quick Setup Guide 1QSG-PX3TS-0D-v3.1-E 255-80-0032-00 RoHSRaritan PX3TSQuick Setup GuideThe PX3TS transfer switch provides AC power to rack IT equipment from one of two AC power sources, and automatically selectswhich source powers the load based on power availability and quality.This Quick Setup Guide is intended for experienced users. For detailed instructions, refer to the PX3TS transfer switch online helpfrom the Support page (http://www.raritan.com/support/) on Raritan's website.Safety PrecautionsWARNING! Read and understand all sections in this guidebefore installing or operating this product. Failure to heed anyof the following WARNINGS may result in electric shock, fire,personal injury and death. Prior to operating this product, theuser should read the online help and specifically the warningsin the online help.WARNING! Connect this product to an AC power sourcewhose voltage is within the range specified on the product'snameplate.WARNING! Connect this product to an AC power source thatis current limited by a suitably rated fuse or circuit breaker inaccordance with national and local electrical codes.WARNING! Use this product in a dry location.WARNING! Connect this product to a protective earth ground.Never use a "ground lift adaptor" between the product's plugand the wall receptacle.QS RuleWhat's Included The PX3TS device Bracket pack and screws Quick Setup Guide Warranty card Two replacement fuses for the inlet transfer switchNote: Depending on your PX3TS' ratings, appropriatefuse types vary. You can order additional fuses fromRaritan. See Technical Specifications in the online helpfor appropriate fuse types and Raritan part numbers forthese fuses. A null-modem cable with DB9 connectors on both ends(Raritan number: 254-01-0006-00) (optional)QS RuleFront View1U models:2U models:1. Six connection ports2. LCD display and control buttons3. Transfer switch indicator lamps and control buttons4. Overcurrent protectors - one for each bank of outlets(available on some models only)QS Rule