10 PARAGON II USER G UIDEStart-Up Display:When a Paragon II unit is powered ON, it performs a start-up test at the beginning. It checks eachchannel and user port to ensure proper operation.Normal Display:After the start-up test, LCD panel displays two lines of messages:1. Line 1: Running message: “Raritan Computer Paragon II: Paragon832/1 Ready”For a Paragon II unit model P2-UMT832M, “Paragon832” is the default name of the Matrixswitch (this name may be changed through the OSUI’s System Configuration submenu).2. Line 2: User port status message: “A/N User (1, 2, 3 …) → None”User port status displays a scrolling status of all user ports, one user port per second. TheUser’s active channel, 1 through 128, is displayed after the user port number.Raritan Computer Paragon II: Paragon832/1 ReadyA User (1, 2, 3 … 8) → NoneA=Active User # 1-8- OR -Raritan Computer Paragon II: Paragon832/1 ReadyN User (1, 2, 3, … 8) → NoneN=Non-Active User # 1-8Figure 9 LCD Normal DisplayPower Up Option:If you hold down the FUNC button on the front panel of the Paragon II unit during Power Up, theParagon II unit will clear its database and reset to factory defaults. Confirm functions by pressingthe ENT button on the front panel.When “Clear Database Hit Ent/ESC?” appears on the LCD, press the ESC button if you want toexit the screen without clearing the database. To clear the database, press the ENT button; “ClearAll?” appears on the LCD. If you press the ESC button once more, the channel configurationwill be cleared and will be rebuilt later by the Paragon unit. This is called a PartialReset. However, if you press the ENT button, both the channel configuration and the user profileand system settings will be cleared.Clear DatabaseHit Ent/ESC?Figure 10 Power Up Clear Database
