CHAPTER 3: O PERATION – USER F UNCTIONS 29Video Gain and Skew CompensationWhen traveling the distance from the target server to the monitor connected to a User Station overdifferent cables, Red, Green, and Blue (RGB) color signals may arrive at different times, causingcolor separation on your monitor; what should appear as a solid white line may instead beseparated into three different colored lines: a Red, a Green, and a Blue.Video Gain and Skew Compensation allow you to resynchronize the arrival of RGB signals byadding a time delay on any color signal (R, G, or B) that arrives at your User Stationsooner. After successful skew compensation, the RGB signals are resynchronized and form asolid white line once more. Note that Skew Compensation is only available in P2-EUST whileVideo Gain is both available in P2-EUST and P2-UST.Video Gain Adjustment and Skew Compensation in P2-EUSTNote that “Automatic” skew compensation is only available when you use P2-EUST and oneof these CIMs: P2CIM-APS2, P2CIM-AUSB, P2CIM-ASUN, P2CIM-APS2DUAL,P2CIM-APS2-B or P2CIM-AUSB-B.Automatic skew compensation adjusts the video quality automatically based on varying cabledistances and cable types. If this video quality adjustment on an active CIM using the P2-EUST isunsatisfactory, you can manually adjust the video gain setting and skew delay of each color viathe OSUI. Once adjusted, the gain setting and skew delay values are stored in the database of thematrix switch that the P2-EUST connects to. The memory space used to store gain setting andskew delay value is allocated dynamically in order to save memory space.To adjust video quality on any channel, connect to the channel you wish to adjust. Press the HotKey (default: Scroll Lock) twice QUICKLY to activate the Selection Menu and click on the * or/ keys on your numeric keypad to select one of four options: AGC, skew delay of Red, skewdelay of Green, and skew delay of Blue. Click on the + or - keys on your numeric keypad toincrease or decrease the skew delay.Skew compensation range is 0 to 31. The video gain changed adjustment value appears in theMessage Banner; click the + and/or - keys to adjust video gain from -15 to +15 (for P2-UST) orfrom 0 to +6 (for P2-EUST) until you are satisfied with the video quality.Please note that you must connect to each channel individually to adjust that channel’s video gainand skew delay.Please see Video Display Adjustment for P2-EUST under Channel Configuration in Chapter4 for additional information.Figure 32 Manual Video Gain/Skew Delay Adjustment Display for P2-EUST
