8 UST-IP USER MANUALConnect to UST-IP RemotelyHaving completed the physical installation of UST-IP, you are now ready to establish an initial networkconnection. Below are basic instructions for doing so. Please see Chapter 3: Raritan Remote Client fordetailed instructions, being sure to review the “Remote KVM Console Control” and “Color Calibration”sections to optimize your UST-IP performance.Launch Raritan Remote Client (RRC)1. Log into any Windows-based computer with network access to UST-IP.2. If you are using Windows NT, 2000, or XP, ensure that you are not a “restricted” user.3. Launch Microsoft Internet Explorer. Ensure that your Internet Explorer security settings allow thedownload and execution of ActiveX controls.Note: The Windows default security setting of “Medium” is sufficient.4. In the URL Address field, type the IP address you assigned to UST-IP in Step II-6. Press [ENTER] toload and launch the web access client.