Raritan UST-IP User Manual
Also see for UST-IP: Quick installation and setup guide
                                                                | |
Contents
|
56 UST-IP USER MANUALEvent Log File and On-Screen Error CodesUST-IP will display or log an error code in the UST-IP Event Log Screen in the event of a problemoccurring. Error codes are eight-digit hexadecimal numbers, containing two parts: the first four denote errortype; and the second four digits denote a location code.These last four digits of the UST-IP error code are the most useful in determining what has caused a systemfailure. Below is a list of location codes (the last four digits of an error code), and their meanings.ERROR C ODE( LAST 4 DIGITS )M EANING R ECOMMENDATION0001 – 0003 Memory allocation error Reboot UST-IP. Make sure the BIOS memory testrecognizes at least 64MB of RAM. If the problempersists, restore the software and file system from theRecovery CD-ROM.0004 Could not read theconfiguration file on startup.The file may be corrupt, thefile system may bedamaged, or the config filemight be from an olderversion of UST-IP.Reenter the configuration information and reboot. Ifthe problem continues, restore the software and filesystem from the Recovery CD-ROM.0005 The config file was missing.This may be the first timeyou have started UST-IP orthe file system has becomecorrupt.Reenter the configuration information and reboot. Ifthe problem continues, restore the software and filesystem from the Recovery CD-ROM.0006 The config file could not besaved. The file system maybe corrupt or the hard drivemay not be responding.Retry, but if the problem persists, restore thesoftware and file system from the Recovery CD-ROM.0007 – 0008 Memory allocation error. Reboot UST-IP. Make sure the BIOS memory testrecognizes at least 64MB of RAM. If the problempersists, restore the software and file system from theRecovery CD-ROM.Delete Memory allocation error. Reboot UST-IP. Make sure the BIOS memory testrecognizes at least 64MB of RAM. If the problempersists, restore the software and file system from therecovery CD-ROM.0009 Could not find the framegrabber card.Power off the system and make sure the framegrabber card is inserted firmly. If the problempersists, there may be a problem with your UST-IPhardware.000A Frame grabber card is notresponding correctly.Power off the system and make sure the framegrabber card is inserted firmly. If the problempersists, there may be a problem with your UST-IPhardware.000B Memory allocation error. Reboot UST-IP. Make sure the BIOS memory testrecognizes at least 64MB of RAM. If the problempersists, restore the software and file system from theRecovery CD-ROM.000C – 000F Memory allocation error. Reboot UST-IP. Make sure the BIOS memory testrecognizes at least 64MB of RAM. If the problempersists, restore the software and file system from theRecovery CD-ROM. |
Related manuals for Raritan UST-IP
manualsdatabase
Your AI-powered manual search engine