Ravelli Francesca User And Maintenance Manual

Also see for Francesca: Installation manual

Contents

Ravelli Francesca User And Maintenance Manual Manual pdf 21 page image

User and maintenance manual for stoves with RDS technologyPag.2101/02/2016.7.1. Display with mode “MAIN SCREEN”Key “1”: access key to “set room temperature” and regulationKey “2”: access key to “set power” and regulationKey “OK”: short press of the key to confirm and come back to the main screen; press the key 3 seconds long to switch ON andswitch OFF the stove.The functionalities of this display when used in mode “MAIN SCREEN” are:-Switch on and switch off of the stove-Set of the room temperature and selection of the type of sensor (supplied sensor connected to the motherboard or sensor integrated to thedisplay)-Set of the working power (1,2,3,4,5)A- MODE WITH SUPPLIED ROOM SENSOR (DEFAULT AND SUGGESTED USE)If you use the supplied room sensor , the display will show the room temperature.To set and modify the room temperature press key number 1 to enter in the dedicated menu and set the desired value with key 1 and 2.The functioning of the stove with room thermostat activated can be of 3 types:A-With supplied room sensor positioned on the backside of the stove ( not available for insert models)B-With room sensor integrated to the displayC-With external thermostat (not supplied)7.1.2. Set of the room temperature7.1.1. switch “on” and switch “off” of the stoveBefore starting the stove please follow following procedure :1- Check that the installation is connected to the chimney2- Connect the power cable3- Set the switch on the backside of the stove on position 14- Load the pellet hopper with 6 mm pellets5- Load the screw as described in paragraph 8.66- Press key OK for 3 seconds long.At this stage the stove will begin the ignition phase.On the display will appear following writings:-IGNITION (waiting time is different depending on default settings)-WAITING FLAME (waiting time is different depending on default settings)-FLAME LIGHT (waiting time is different depending on default settings)-WORK (waiting time is different depending on default settings)CalenderRoom temperatureClockWorking powerStove statusPic. 1 Pic. 27. Description of the functioning and symbology of the displayThe innovation of this particular display is the communication through low voltage conveyed waves (12 volts) between the electronicmotherboard and the display. The communication is made trough a bipolar cable (ex: the cable for the stereo speakers) and the novelty is thepossibility to install the display in the wall using the optional standard frame for electrical box 503.MARMODULATIONSET TEMP. ROOMSENSOR CONSOLLESET TEMP. ROOMSENSOR CONSOLLESET TEMP. ROOMSENSOR CONSOLLE