C HAPTER 434 Fast 9600 - 80’-120’ Booms AutoBoom Installation ManualINSTALL THE LEFT AND RIGHT CYLINDER HOSESFIGURE 13. Cylinder Hoses Installed1. Disconnect the machine’s cylinder up hoses from the left and right cylinder up ports of the machine’s hydraulicvalve.2. Install 9/16” JIC M/M/F swivel run tee adapter fittings (P/N 333-0012-043) in the open ports on the machine’shydraulic valve.3. Connect the machine’s left cylinder hose to the opposite end of the installed tee fitting in the left cylinder upport of the machine’s hydraulic valve.4. Install the straight end of the supplied hydraulic hose (P/N 214-1000-610) on the 90° end of the installed teefitting.5. Connect the 90° end of the installed hydraulic hose to the fittings installed in Port LC of the AutoBoom valve.6. Connect the machine’s right cylinder hose to the opposite end of the installed tee fitting in the right cylinder upport of the machine’s hydraulic valve.7. Install the straight end of the supplied hydraulic hose (P/N 214-1000-610) on the 90° end of the installed teefitting.8. Connect the 90° end of the installed hydraulic hose to the fittings installed in Port RC of the AutoBoom valve.
