Raven AutoBoom Installation Manual

Also see for AutoBoom: Installation manual Installation manual Installation manual Installation manual Installation manual

Contents

Raven AutoBoom Installation Manual Manual pdf 21 page image

3Manual No. 016-0230-005 17PowerGlide PlusInstall the Pressure HosesFIGURE 9. Pressure Hose Installed1. Locate the pressure line on the machine’s hydraulic valve (port P).2. Trace the pressure line back to the point it joins the steel hydraulic line.3. Disconnect the pressure line from the steel line.4. Connect the end of the pressure line to the fitting installed in Port EF of the AutoBoom valve.5. Connect the straight end of the supplied hydraulic hose (P/N 214-1000-302) to the machine’s steel line.6. Connect the 90° end of the installed hose to the fitting installed in Port P of the AutoBoom valve.WARNINGHydraulics are under pressure. Care shouldalways be taken with a system that has beenpressurized. When disconnecting or purginghydraulic hoses, be aware that the hydraulicfluid within the machine’s system may beextremely hot and under high pressure.CAUTIONWhen installing AutoBoom hydraulics orperforming diagnostics, maintenance, or routineservice, ensure precautions are taken toprevent any foreign material or contaminantsfrom being introduced into the machine’shydraulic system.Objects or materials that are able to bypass themachine’s hydraulic filtration system will reduceperformance and possibly damage theAutoBoom hydraulic valves.New Pressure Hose