Raven AutoBoom Installation Manual

Also see for AutoBoom: Installation manual Installation manual Installation manual Installation manual Installation manual

Contents

Raven AutoBoom Installation Manual Manual pdf 22 page image

Chapter 318 Case IH 3150/3185, Pre-2002 Tyler Patriot Open Center AutoBoom™ Installation ManualInstall the Tank Hoses - CaseIH and Patriot 1997 & Newer OnlyFIGURE 10. Tank Hose Installed - CaseIH and Patriot 1997 & Newer Only1. Disconnect the return hose from the machine’s hydraulic tank.2. Install the 1-1/16” JIC M/M/F swivel run tee (P/N 333-0012-109) on the machine’s hydraulic tank.3. Connect the return hose to the opposite end of the installed tee fitting.4. Install the 1-1/16” JIC M/F 90° swivel elbow fitting (P/N 333-0012-099) on the 90° end of the installed teefitting.5. Connect the straight end of the supplied hydraulic hose (P/N 214-1000-304) to the installed 90° elbowfitting.6. Connect the 90° end of the hydraulic hose to the fitting installed in Port T of the AutoBoom valve.Install the Tank Hoses - Tyler Patriot 1996 & Older OnlyFIGURE 11. Tank Hose Installed - Tyler Patriot 1996 & Older Only1. Locate the tank line on the machine’s hydraulic valve (port T).2. Trace the tank line back to the point it joins the steel hydraulic line.3. Disconnect the tank line from the steel line.