Raven CR7 Operation Manual

Also see for CR7: Operation guide Manual Installation manual Quick start guide Installation guide

Contents

Raven CR7 Operation Manual Manual pdf 52 page image

50MASTER SWITCH CONFIGURATION1. Press Master Switch on the CRX Settings screen. The Master Switch ControlConfiguration window will open.2. If desired, select the Require All On checkbox. This requires all selected inputs tobe On for the Master to be on. Otherwise only one selected input needs to be on.3. The default for On-Screen checkbox is selected.NOTE: Aux Input - Select this option if there is a wired switch to the CRX AuxInput wire to act as a master switch.AccuBoom - Select this option if there is a wired switch on theAccuBoom cabling orange wire to act as a master switch.Steering - Select this option if you want the SmarTrax to record dataonly when steering is engaged.On-Screen - Only selectable if all other options are not selected.4. After adjusting all the settings, press Accept .UNIVERSAL TERMINAL (UT) SETTINGSThe UT Settings page provides options to identify connected UT’s, clear the UTObject Pool or change the UT instance when multiple UT’s are available. To accessthe UT Settings page, press UT Settings on the CRX Settings page.LIGHTBAR CONFIGURATIONNOTE: Lightbar configuration will only be available on CR12 if a lightbar isdetected.1. To access the Lightbar Configuration settings, press Lightbar . TheLightbar Configuration window will open.2. The default setting for the lightbar is that it is enabled. To disable the light-bar,deselect the Enable checkbox.