Raven CR7 Operation Manual

Also see for CR7: Operation guide Manual Installation manual Quick start guide Installation guide

Contents

Raven CR7 Operation Manual Manual pdf 53 page image

513. The default setting for the Reverse LED Indication is active. To deactivate theReverse LED Indication, deselect the Reverse LED Indication checkbox.NOTE: Selecting or deselecting the Reverse LED Indication will change if thelightbar LEDs display to the right if to the right of the guidance line or tothe left if to the right of the guidance line.4. The default setting for Path Deviation Sensitivity is Fine. To adjust the PathDeviation Sensitivity select the desired radial button. While adjusting thesensitivity, note that the light bar increments along the bottom indicates thedistance off line for each light. For example, with Fine selected the first red lightwill turn on when the implement is 4” (10 cm) off line, the second light will turn onwhen the implement is 10” (26 cm) off line.After adjusting all the settings for thelight-bar, press Accept .If an external lightbar is connected via the serial port, that option will display on theLightbar Settings page and be selected. If desired, deselect the external lightbar.NOTIFICATIONSPress the Notifications button to access the Notification History. To view moreinformation on a specific notification, press the notification. A notification windowwill open displaying the notification type, additional notification details, and howlong ago the notification occurred. After reviewing the notification, press Complete. When done viewing the notifications, press Accept .