Raven CR7 Operation Manual

Also see for CR7: Operation guide Manual Installation manual Quick start guide Installation guide

Contents

Raven CR7 Operation Manual Manual pdf 61 page image

595. If desired, press the About tab to view information about the CRXincluding the software version, when the software version was installed, RunHours, and Total Run Hours. If desired, press Erase Data to reset the system anderase all data stored on the CRX. This includes all implements, Grower/Farm/Fielddata, and settings on the CRX.6. After adjusting all the settings, press Accept .DOWNLOADING A CRX UPDATE TO USBTo locate and download a CRX software update to a USB stick:1. On a computer, enter http://portal.ravenprecision.com/ into the address bar.2. Press Enter.3. Click Product Documentation.4. Click CRX.5. Navigate to the dropdown.6. Select the desired Software.NOTE: If desired, review the download and installation instructions.7. Select Save As from the Save dropdown.8. Select the desktop as the desired save location.9. Press Save.10. Extract the files from the .zip file onto the computer.NOTE: do not rename the extracted files as this will not allow the software todownload to the field computer.11. Transfer the extracted files to the USB flash drive.INSTALLING CRX UPDATES VIA USBTo apply a software update to the CRX device:1. Insert the USB flash drive with the CRX update in the required folder into the CRXdevice.2. Once the update file is detected on the USB drive, select the desired update fromthe USB drop down list then press Install.ISO NODE AND GPS UPDATESTo check for ISO Node or GPS updates via Slingshot: