3-40 SL520/530/631 PLUS Chartplotter DisplaysManaging Tracks2. The next available entry on the track list is highlighted.(If required, you can use the trackpad to select another position in the list;this can be a blank slot, or an existing track that you no longer require).3. Press SAVE TRACK. The name track soft keys are displayed.4. If you do not wish to name or rename the track, press the NO soft key (orCLEAR) to clear the list. The track is saved and is listed as Track NotNamed.If you wish to name the track press the YES soft key. Use the trackpad tomove the cursor right or left to the character you wish to edit. Then use thetop or bottom of the trackpad to increase or decrease the letter or number.You can use a Navigator Keypad (see Using the ST60 or ST80 NavigatorKeypad on page 3-15) to name the track.5. Press ENTER to finish and clear the Track List, then to return to the defaultsoft key display, press ENTER again or CLEAR.Naming, Erasing and Showing a Track➤ To name an existing track, erase a track or show a track, you select the trackfrom the track list, then press the appropriate soft key as follows:1. Press the TRACK LIST soft key. The Track List is displayed. The selection barindicates the selected track.Select the required track then press the appropriate soft key.2. If you NAME a track, use the trackpad to move the cursor right or left to thecharacter you wish to edit. Then use the top or bottom of the trackpad toedit the letter or number. Press ENTER finish the operation or CLEAR tocancel the name, then ENTER to remove the track list.3. If you ERASE a track you are prompted to confirm.Press NO to cancel the operation, then ENTER to remove the track list.Press YES to erase the track from the list, then ENTER to remove the tracklist.4. If you SHOW a track, and you have a current track on screen, you areprompted to save the track. Proceed as previously described in Clearing theCurrent Track.Alternatively, press the NO soft key to cancel the SHOW TRACK operation.The track list is removed and the selected track is displayed.5. Press ENTER or CLEAR to return to the default display.SAVETRACKYES NONAME TRACK?D4256-1TRACKLISTNAMETRACKERASETRACKSHOWTRACK
