86Type 100/300 Operation and Installation HandbookTrim LevelTrim Level sets the level for automatic trim which applies additional rudderto correct for unbalanced propeller torque on twin engine installations, orweather helm.The Trim Level settings available are as follows (rate of trim increases withtrim level):Range 0 to 4Default setting 2 (Displacement)3 (Semi displacement, planing andstern drive)81004 24Joystick Mode (Manual Type)Power steer selects the Joystick mode of operation: Proportional or ‘Bang-Bang’.Proportional applies rudder in proportion to Joystick movement - thefurther the Joystick is held over the greater the applied rudder.Bang-Bang applies continous rudder drive in the direction of lever move-ment. To improve control the speed of rudder movement changes with theangle of the lever. For maximum speed push the lever hardover. If the leveris returned to the center position the rudder will remain in its currentposition.The settings available are as follows:Range 012OFF(Proportional)(Bang-Bang)Default setting 181004-25Drive OptionDrive Option sets the type of drive used by your vessel: mechanical withrudder reference or hydraulic with rudder reference.The settings available are as follows:Range 1 to 4Default setting 1 Future use2 Future use3 (Displacement and stern drive)4 (All hydraulic installations)81004-26
