Chapter 5: Initial Sea Trials 935.3 Compass Alignment (without deviation correction)It is possible to change the alignment between the fluxgate and the ship'scompass without carrying out the automatic deviation correction. Proceedas follows:1. Push and hold STANDBY for 2 seconds to select fluxgate alignment/correction mode.2. Use the course change keys to adjust the heading displayed.3. To exit fluxgate alignment/correction and store the new setting pushand hold STANDBY for 2 seconds until the pilot returns to ‘STANDBY’mode.4. To exit fluxgate linearisation without saving the new setting pushSTANDBY momentarily.5.4 First Sea TrialsIn clear waters, steer the boat on to the required heading.1. Hold the course steady for 5 to 10 seconds.2. Press AUTO to lock onto the current heading. In calm conditions aperfectly constant heading will be maintained.3. Alter course to port and starboard using the course change keys onany control unit. Course changes should be prompt and without anysign of overshooting.4. Press STANDBY to disengage the autopilot for return to handsteering.
