2. Press the ROUTES softkey.3. Press the REVIEW AND EDIT ROUTES softkey.4. Using the trackpad or rotary control, select the route you want toadd a waypoint to.5. Press the AMEND ROUTE COURSE softkey.6. To define a new waypoint using the Chart, position the cursorover the appropriate route leg, and then drag it to the newposition and press the PLACE WAYPOINT softkey.7. To add a waypoint from the waypoint list, press the USEWAYPOINT LIST softkey.8. Press the trackpad right to highlight the right-hand column ofthe list.9. Press the trackpad down until the last entry in the list ishighlighted.10.Press the trackpad left to highlight the left-hand column of the list.11.Using the trackpad or rotary control, highlight the waypoint youwant to insert at the start of the route.12.Press the INSERT WAYPOINT softkey.13.Press the OK button.Displaying the route listIn the chart application:1. Press the NAVIGATION OPTIONS softkey.2. Press the ROUTES softkey.3. Press the REVIEW AND EDIT ROUTES softkey.Displaying route detailsDetails of all routes that you create are held in the Route List.You can:• View the route list and then select the required route, or• Select the required route on-screen.The TIME and SOG options can then be used to aid passageplanning by displaying the time in hours or as an ETA and the SOGas actual or planned. If the route is currently being navigated to(active), the data is updated to show bearing, distance and timefrom your current position.Displaying route details using the cursorIn the chart application:1. Using the trackpad, position the cursor over any leg of therequired route.2. Press the REVIEW AND EDIT ROUTES softkey.3. Using the trackpad, highlight the required route from the list.4. Press the ROUTE DETAILS softkey.Displaying route details using the route listIn the chart application:1. Press the NAVIGATION OPTIONS softkey.2. Press the ROUTES softkey.3. Press the REVIEW AND EDIT ROUTES softkey.4. Using the trackpad, highlight the required route from the list.5. Press the ROUTE DETAILS softkey.Following a routeWhen you are following a route the active route is shown on allchart windows.When the distance to the next waypoint in the route is less than thatspecified for the arrival alarm radius, or your vessel reaches theclosest point of approach to the target (defined by a line passing78 C-Series Widescreen user reference
